Description
This hardware locks the leaf spring to the trailing arm. It is required with our rear sway bar, but it is a good idea to run it whether you run a rear sway bar or not. This linkage prevents the trailing arm from floating off the spring as you crest hills. Included are the four expensive high misalignment spherical bearings and the mounting hardware as shown.
The spacers are cut a little long so you will probably have to trim them slightly to fit snugly into your trailing arm as shown. The stock trailing arm width varies too much for us to ship a positive inside fit. Notice also the window you will have to cut in the bottom of your trailing arm. If you buy your racing trailing arms from us and at the same time you order this assembly, we will do all the machining on the trailing arm to accommodate these mounts.
Free Freight
